Relief of residual stress in Al2O3/Nb joints brazed with Ag-Cu-Ti/Cu/Ag-Cu-Ti composite interlayer

Ag-Cu-Ti/Cu/Ag-Cu-Ti composite interlayer was successfully designed to braze Al2O3 ceramic and Nb. The effect of the addition of Cu interlayer with various thicknesses on the microstructure, residual stress and mechanical properties of the brazed joints was investigated by finite element modeling (FEM) computation combined with experimental verification. The results showed that the layered Ag-Cu-Ag solid solution structure formed in the Al2O3/Nb brazed joints when the composite interlayer was used. Moreover, the thickness of TiO + Ti3Cu3O reaction layers adjacent to the Al2O3 ceramic substrate did not change obviously regardless of the Cu foil thickness. The maximum residual stress in the whole brazed joint always appeared in the Al2O3 ceramic substrate nearby the interlayer, but it was reduced from 384 MPa to 119 MPa when a 150 μm thick Cu foil was added. The variation of calculated residual stresses as a function of Cu foil thickness, which was verified by X-ray measurement, exhibited a consistent with Al2O3 ceramic strain energy. Thus, the calculation of Al2O3 ceramic strain energy could be a good criterion to evaluate the joint shear strength because the fracture occurred in the Al2O3 ceramic. The reduction of detrimental residual stress was primarily attributed to the increased plastic strain energy of Cu interlayer. The FEM and experiment results indicated that the ability of plastic deformation of the interlayer played a key role in determining the residual stress in the brazed joint, providing a method for improving the bonding properties of ceramic and metal.

---

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019)